![background image](http://html1.mh-extra.com/html/christie/cineipm-2k/cineipm-2k_user-manual_2603680012.webp)
INSTALLATION AND SETUP
2-6
Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
INPUT 1
consists of 5 BNCs (connectors) for linking to a variety of sources. The
typical connection would be to an RGB source such as a PC, Mac, DEC, Sun, SGI
and others. The
Cine-IPM 2K
supports multiple sync types with RGB signals: sync-
on-green, composite sync, and separate H & V syncs.
NOTE:
Depending on your source, you may need a custom adapter cable with BNC
connectors at the projector end and a different type of connector at the other (such as
a 15-pin "D" connector for some computer sources). Contact your dealer for details.
Connect the
SYNC
BNC input(s). Then connect the red, green and blue source outputs
to the
RED
,
GREEN
, and
BLUE
BNCs on the
INPUT 1
panel. If the source uses sync-
on-green, only the red, green, and blue connections are required. If the source
provides a composite sync output, connect it to the
SYNC
input labeled
HOR/COMP
. If
the source provides separate horizontal and vertical sync outputs, connect horizontal
sync to the
SYNC
input labeled
HOR/COMP
and connect vertical sync to
SYNC
input
labeled
VERT.
See Figure 2.8.
Figure 2.8. Connecting an RGB source
NOTES: 1)
If for some reason the projector fails to recognize a signal as an RGB
signal, specify this
Color Space
option within the
Image Settings
menu. See
3.5,
Adjusting the Image.
2)
To connect YPbPr signals–such as from DVDs or analog HDTV
sources–to
INPUT 1
, use the red, green and blue BNCs as described in
YPbPr Signals
(below).
3)
This input does not route to the decoder and cannot be used for Composite
Video or S-Video.
Connect a YPbPr signal (
component video
) to
INPUT 1
or
INPUT 2
as shown in Figure
2.9.
NOTES: 1)
If, for some reason, the projector fails to recognize a YPbPr signal,
specify this
Color Space
option within the
Image Settings
menu. See
3.5, Adjusting
the Image
.
2)
Do not connect digital component signals (known as YCbCr) to
INPUT
1
or
INPUT 2
. Use the appropriate optional digital interface installed in
INPUT 5
or
6
only. 3) With v1.1 software, digitally encrypted source material (HDCP) cannot be
processed and will be displayed as a blank screen.
RGB
Signals
X
YPbPr
Signals
X
(COMPONENT
VIDEO)
Содержание CineIPM-2K
