Chattanooga Intelect RPW Скачать руководство пользователя страница 12

Страница: 12 / 94

Intelect® RPW

SAFETY INSTRUCTIONS

CAUTION

•

To determine the distance of separation for all equipment operating

near the Intelect RPW, consult the EMC tables applicable to the

other equipment.

•

This equipment is to be used by, and sold to, a trained clinician only

under the prescription and supervision of a licensed practitioner.

•

Only users trained in the use of radial pressure wave therapy should

operate the unit and its applicators.

•

The Power On/Off button is considered a "soft" switch and does

not isolate the unit from mains power when the unit is turned off.

Therefore, you must disconnect the male end of the power supply

cord from the electrical outlet (mains power supply) in order to

isolate it.

•

The Intelect RPW is not intended for the treatment of kidney stones.

•

Depress the tabs of the caster locks to prevent the front wheels from

moving during treatment and storage.

•

Disconnect the power supply cord before removing covers on

this equipment. Refer the servicing of this unit to qualified service

personnel.

•

This equipment has an output that is capable of producing a

physiological effect.

•

Grounding reliability can only be achieved when the equipment is

connected to an equivalent receptacle marked "Hospital Only" or

"Hospital Grade."

•

Medical electrical equipment needs special precautions regarding

EMC and needs to be installed and put into service according to

the EMC information provided in this manual.

•

This unit can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful

interference to other devices in the vicinity. However, there is no

guarantee that interference will not occur in a particular installation.

Harmful interference to other devices can be determined by turning

this equipment on and off. Try to correct the interference using one

or more of the following: reorient or relocate the receiving device,

increase the separation between the equipment, connect the

equipment to an outlet on a different circuit from that to which the

other device(s) are connected, and consult the factory field service

technician for help.

Содержание Intelect RPW































































































Результаты поиска

Содержание Intelect RPW

Отзывы:

Chattanooga Intelect RPW, Руководство пользователя, Страница: 12 / 94

Результаты поиска

Содержание Intelect RPW

Отзывы: