Chattanooga Intelect RPW Скачать руководство пользователя страница 42

Страница: 42 / 94

Intelect® RPW

PREPARING THE UNIT FOR THERAPY

The unit has been completely assembled in the factory and is
ready for use except for connection of the handpiece and the
power cord.
Proceed as follows in order to prepare the unit for operation:

•

Make sure that the voltage rating on the serial decal

conforms to the system voltage of the building.

•

Install the required transmitter (insert) into the handpiece.

See

page 34

for more information on installing the

transmitter.

•

Plug the handpiece cable into the socket on the back of

the unit. Attach the connecting cable in the cable hook on

the side of the unit.

•

Check the condition of the housing and the insulation of

the handpiece, handpiece connection cable, and the power

supply cable. Also make sure that the cables have been

routed correctly.

•

Insert the power cord plug into an earthed socket outlet.

There is no need to plug the power cord into an isolated

circuit for the proper function of this unit.

•

Position the device such that it is not difficult to disconnect

the power cord plug from the outlet, in case of emergency.

•

Depress the tabs of the caster locks to prevent the front

wheels from moving.

The unit and the handpiece must be positioned so that there is no

danger of personal injury. Therefore, you must read and observe the

safety instructions and the list of contraindications before putting

the unit into operation.

Make certain that the unit is electrically earthed by connecting

only to an earthed electrical service receptacle, conforming to the

applicable national and local electrical codes.

DANGER

WARNING

Содержание Intelect RPW































































































Результаты поиска

Содержание Intelect RPW

Отзывы:

Похожие инструкции для Intelect RPW

Бренды по названию

Популярные бренды

Chattanooga Intelect RPW, Руководство пользователя

Результаты поиска

Содержание Intelect RPW

Отзывы:

Похожие инструкции для Intelect RPW

Бренды по названию

Популярные бренды