Chattanooga Intelect Neo Скачать руководство пользователя страница 61

Страница: 61 / 84

Intelect® Neo Clinical Therapy System

OPERATION

SEMG OPERATION

The Neo Therapy sEMG + Stim modality utilizes sEMG

biofeedback activity coupled with triggered electrical

muscle stimulation using selected electrotherapy

waveforms for the maximum bene

t in muscle retraining.

The following option are available: sEMG (Channel 1),

sEMG (Channel 2), sEMG (Channels 1 & 2), sEMG + Stim

VMS, and sEMG + Stim Sym Biphasic.

The Electrical Muscle Stimulation is triggered when the

muscle contraction (sEMG portion of the therapy) reaches

the target, sEMG stops, and the muscle is then electrically

stimulated for the pre-set period. After stimulation, the

patient is given a short rest period and then repeats the

muscle contraction, attempting to reach the target to

again trigger the electrical stimulation. This is repeated

throughout the therapy session.

Session parameters can be stored on a USB storage drive

and accessed on the Home Screen under the Patient Data

icon. The sEMG portion of sEMG + Stim modality is used

to force the patient to contract the muscle to a prescribed

target. The data cannot be recorded or stored on the

Patient Data Card or the sEMG Data Card.

NOTE:

This section applies when Stimulation Channels

and sEMG module is installed. Complete the following

steps to begin sEMG treatment:
1. Touch the screen to activate the system.

2. Prepare Patient and therapy system – Refer to the

PATIENT PREPARATION section for electrode selection,

preparing the patient, and securing electrodes, on

page 41.

3. Select sEMG icon from the Home screen.

4. Select the prescribed channel icon (See above for

the available choices). The treatment screen will

appear (image below illustrates the sEMG Channel 1

selection). Set-up Steps:

• To set the Target Threshold either Automatically or

Manually, touch the CUSTOMIZE Icon.

• Adjust the Intensity with the Intensity Dial.

5. Press Start/Pause button to begin therapy. Screen

prompts will appear:

• “Contract” - Instructs the patient to attempt reaching

the Target Threshold “Contract” appears on the screen,

indicating the patient should attempt to contract the

selected muscle(s). “Contract” remains on the screen

until the patient’s sEMG output reaches the Target

Threshold, at which time Electrical Stimulation is

delivered.

• “Hold” - Instructs the patient to contract the selected

muscle(s). When the Target Threshold is reached, the

“Hold” prompt appears, instructing the patient to

continue to contract the selected muscle(s) until the

pre-set time for the Stimulation ends.

• “Relax” - Instructs the patient to Relax. “Relax” appears,

indicating the patient should relax, stopping the

contraction. Relax continues for the pre-set time.

The cycle repeats when “Contract” re-appears, again

indicating the patient should attempt to contract the

selected muscle(s).

6. The following options are available under the

Customize treatment screen and accessed by pressing

the appropriate icon:

7. To view information explaining the waveform, select

the Modality Description icon. Press the Up and Down

icons to view additional text. Press the Back Arrow

icon to return to the previous screen or the Home icon

to return to the Home screen.

To view the most commonly used electrode

placement for the selected waveform, select the

Guidelines Icon. A picture will appear prompting you

to select the body part you wish to treat. Press the

Down icon to scroll through text. Press the Back Arrow

icon to return to the previous screen or the Home icon

to return to the Home screen

Note: When using sEMG + Stim, the Customization

screen adds two icons to edit Stimulation settings and

to set stimulation intensity.

Содержание Intelect Neo





















































































Результаты поиска

Содержание Intelect Neo

Отзывы:

Похожие инструкции для Intelect Neo

Бренды по названию

Популярные бренды

Chattanooga Intelect Neo, Руководство пользователя

Результаты поиска

Содержание Intelect Neo

Отзывы:

Похожие инструкции для Intelect Neo

Бренды по названию

Популярные бренды