50
Intelect® Neo Clinical Therapy System
CPS
(
CLINICAL PROTOCOL SETUP
)
The Intelect® Neo Clinical Therapy System has a Clinical
Protocol Setup (CPS) icon that is a series of protocol
presets where the Body Area, Clinical Indication,
Pathological Condition and Pathological Severity are
selected by the user, and the Clinical Protocols algorithm
will select the parameter settings. All Clinical Protocols
can be edited to suit appropriate patient treatment
prescription and patient comfort.
The following information gives general instructions to
access, select, and setup Clinical Protocols. Each Clinical
Protocol is set up and edited in the same basic manner.
1. Select CPS from the Home screen.
2. Touch the body part you wish to treat.
3. Using the Up and Down Arrows, scroll to the
appropriate indication and select by pressing the
“
√
” symbol.
4. Using the Up and Down Arrows, scroll to the
appropriate condition you wish to treat and select
by pressing the “
√
” symbol.
5. Select the modality desired.
6. Begin therapy by pressing the “Start” button or make
setting changes using the “Customize” icon.
7. To save the customized protocol, press the Save icon.
8. Save a new protocol by pressing the Save as a New
Name icon and typing in a name for the protocol. Press
the Save icon when finished.
ELECTROTHERAPY OPERATION
All waveforms in the Intelect® Neo Clinical Therapy
System are set up and edited in the same basic fashion.
The Intelect® Neo Clinical Therapy System has an
Electrotherapy Icon with the following waveforms: IFC
(Interferential) Traditional (4 Pole), TENS- Asymmetrical
Biphasic, TENS- Symmetrical Biphasic, TENS- Alternating
Rectangular, TENS- Monophasic Rectangular, TENS HAN,
High Voltage Pulsed Current (HVPC), VMS™ Diadynamic
Waveforms, IFC Premodulated (2p), Russian, Microcurrent,
VMS™Burst, VMS™ FR, MONOPHASIC: Monophasic
Rectangular Pulsed, MONOPHASIC: Monophasic
Triangular Pulsed, GALVANIC: Continuous, GALVANIC:
Interrupted, Träbert (Ultrareiz), SURGED: Monophasic
Rectangular, SURGED: Monophasic Triangular,
Iontophoresis.
Complete the following steps to begin Electrotherapy
treatment:
1. Prepare patient and therapy system for Electrotherapy.
Refer to the PATIENT PREPARATION section on page
41 for electrode selection, preparing the patient, and
securing electrodes.
2. Touch the screen to activate the system. Read and
carefully follow the instructions on the screen.
3. From the Home Screen, select the Electrotherapy icon.
4. Select desired waveform from the listing on the
screen by pressing the appropriate icon. Refer to the
Specifications section of this manual for all waveform
specifications for the Intelect® Neo Clinical Therapy
System. The screen below will then appear.
OPERATION
9. Overwrite a previously saved protocol by using the Up
and Down arrows or Previous Page/Next Page icons to
select the protocol to overwrite. Press the Save icon to
save the overwritten icon.
10. Return to Home screen by pressing the Home icon.
Press the Back arrow to scroll back one screen.
Содержание Intelect Neo
Страница 1: ...Intelect Neo Clinical Therapy System User Manual Operator and Installation Instructions ...
Страница 2: ......