CF MOTO CF500-5, Руководство по обслуживанию

Страница: 79 / 254

4-6
Adding Coolant
Add coolant through filling port
Start the engine and discharge air from cooling system.
Check from filling port that air is fully discharge from
cooling system and install the radiator cap
Remove reservoir tanl cap and add doolant till the up-
per limit
Caution:
Chen coolant level when the vehicle is on an even
ground
Discharge
Discharge the air from cooling system according to
the following steps:
1.Remove drain bolt(4-5),discharge air and install it
2.Start the engine and run it several minutes at idle
speed
3.Quickly increase throttle 3~4 times to discharge air
from cooling system
4.Add coolant till filling port
5.Repeat step 2&3 till no more coolant can be refilled
6.Check coolant level in reservoir tank and refill till
upper limit,install reservoir tank cap