CF MOTO CF500-5, Руководство по обслуживанию, Страница: 77 / 254

4-4
Pressure testing of cooling system
Apply the specified pressure(radiator cap opening
pressure) for 6 seconds and make sure that there is
drop in pressure
Caution
Do not apply pressure over the specified pressure
[108kPa(1.1 kgf/cm 2 )],or the cooling system may be
damaged.
In case there is any pressure leakage,check the pipe,
joint parts,joints of water pump and drainage(4-5)
Replacing Coolant,Air Discharge
Preparation of coolant
Caution:
Coolant is poisonous,DO NOT drink ot splash it to
skin,eyes and clothes
-If coolant splashed in your eyes,throughly wash your
eyes with water and consult a doctor
-If coolant splashed on your clothes,quickly wash it
away with water then with soap and water
-If coolant is swallowed,induce vomit immediately and
see a physician
-Store the coolant properly and keep it away from reach
of children
Caution:
Mix the coolant(undiluted) with soft
water according to the temperature 5¡æ
lower than the actual lowest temperature in the opera-
tion area.
Coolant should be made from undiluted coolant with
soft water.
Standard density of coolant: 50%
Recommended coolant: CFMOTO coolant
(Direct application without having to be
diluted)
Drainage of coolant
Remove the radiator cap
Caution
Open the radiator cap after the coolant
is cooled down.
Remove:
-Front top cover(2-8)
-Radiator Cap(4-3)