CF MOTO CF500-5, Руководство по обслуживанию, Страница: 211 / 254

10-9
10 Front/Rear Axle
10
z
Check if there is crack or damage in rear gear case, see mounting hole is ok . Replace
gear case or right cover if necessary;
z
Check if bearing clearance is normal,and turing stability, rollway, stellball, neddle bearing
as well. Replace bearing if necessary.(Special tools are required)
z
Check worn status of drive bevel gear and ring gear rear axle. Replace if necessary;
z
Check oil seal lips, o-ring shape. Replace parts if necessary;
z
Check cylndrical surface of rear axle and oil seal lips. Replace if necessary;
z
Check inner and outsider spline. Replace if necessary;
z
Check other parts. Replace if necessary.
a
D i s a s s e m b l e n e e d l e b e a r i n g
55BTM6720
as illustration if necessary
b
Disassemble needle bearing NA5903
as illustration after heating upto
150 ° C
Needle bearing removal
Rear axle inspection after disassembly