CF MOTO CF500-5, Руководство по обслуживанию

Страница: 171 / 254

6-71
6 Engine Removal, Inspection & Installation
6 6
6 6
6
f-Driven bevel gear front face assembly
marking data, minus from 60
g-Driven bevel gear back face assembly
marking data£¬minus from 80.5
h-Left crankcase assembly marking data;
i-Right crankcase assembly marking data£»
e.g:
Driven bevel gear marking data is -6, then
e=75.94
Driven bevel gear front face marking data is
+0, then f=60.00
Driven bevel gear front face data is -13,
then g=80.37
Marking data on leftcrank is 97.29, then
h=97.29
Marking data on right crankcase is 1.67,
then i=1.67
After round integer, its washer thickness is0.
65
;
Round interger method the sane as drive
bevel gear adjustment washer.
Driven bevel gear provides following spcs:
0.15\0.20\0.25\0.30\0.35
Requirements will met through adjusting
washer thickness.