CF MOTO CF500-5, Руководство по обслуживанию

Страница: 20 / 254

1-16
CFMOTO
Engine Tools
Measuring Tools
No Name Type Function Remark
1 Vernier Calipers 0-150mm measure length and thickness
2 Micrometers 0-25mm
measure the outer diameters of swing
arm, valve rod and camshaft
3 Dial gauge 25-50mm Measure max. lift range of camshaft
4 Dial gauge 75-100mm Measure piston skirt
5 Inner dia. Gauge, Cylinder Measure inner dia. of cylinder head
6 Inner dia. Gauge, 10-34mm
Inner dia. of swing arm, piston pin hole,
and rod head hole
7 Dial Test Indicator 1/100 Run-out
8 Knife Straight Edge plainness
9 Feeler Gauge Plainness, adjusting valve clearance
10 Fuel Level Gauge Fuel level length of carburetor
11 Plastic gauge Fit clearance
12 pull tension gauge Spring bounce
13 Tachometer Engine rotation rate
14 Cylinder Pressure Meter pressure in cyclinder
15 Oil Pressure Gage Oil pressure
16 Barometer Opening pressure of radiator cover
17 Ohmmeter Resistance and voltage
18 Amperemeter Opening of currency / switch
19 Thermometer Liquid temperature
20 Timing Lights Test spark timing
21 Torque Tester One Set Tightening torque
Auxiliary Measuring Instrument
22 Alcohol Burner Warming up
23 Magnet Stand Install dialgauge
24 Slab Auxiliary measure supplementary
25 V-Block Run-out supplementary
26 Forcep Install valve clip
27 Plier Disassemble and install circlip
28 Joint Plier Disassemble and install flange
29 Impact Driver Disassemble cross recessed bolt
30 Slot Type Driver
31 Cross Type Driver