CF MOTO CF500-5, Руководство по обслуживанию

Страница: 188 / 254

8 FRONT WHEEL,BRAKE SUSPENSION,STEERING SYSTEM
8 8 8 8 8
8-11
Constant velocity drive shaft
Attention:For this vehicle, inspection,dis-
a s s e m b l i n g a n d a s s e m b l i n g t h e
front&rear axle LH&RH constant veloc-
ity drive shaft are in the same way.
(55)Constant velocity drive shaft, LH.
Front axle
Disassembling
Attention:You donot need to remove the front
suspension assy from the vehicle if you only re-
pair the front axle costant velocity drive shaft,
LH.
remove front left wheel(8-3)
remove front left brake caliper(8-4)
remove fornt left rim hub(8-3)
Examine duct boot, replace with new ones if destroy.
costant velocity drive shaft shake£¬inspect if the
universal joint move freely, the bearing move freely, if
there is gap between joint and spline.
Replace with new ones if dumb,abnormal sound,gap.
Attention:Double offset universal joint must can
be move freely, or else,it cannot control the tyres
and result in accident.
Assembling
Use special tool to press the ball pin into the arm
assy.
Assembling carry on according to the opposite se-
quence of disassembling.
Attention: Replacement is required if the
right&left arm shake after installation.
Mounting torque:
40
~ ~
~ ~ ~
50N.m