CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 8 / 241

1-4
CFMOTO
■ Check if the disassembled rubber parts ■ Apply or inject recommended lubricant to
are aged and replace if necessary. Keep the the specified parts.
rubber parts away from grease.
■
Use special tools wherever necessary
■
If the disassembling of pressed ball bearing
is done by pressing the balls, do not use the
disassembled bearing.
■
Turn the ball bearing with hands to
■
Install the one-side dust-proof bearing in
make sure the bearing will turn smoothly. The right direction. When assembling the
.Replace if the axial or radial play is too big. open type or double-side dustproof bearing,
.If the surface is uneven, clean with oil install with manufacturer
’ s mark outward.
and replace if the cleaning does not help.
.When pressing the bearing into the machine
or to the shaft, replace the bearing if it could
not be pressed tight.
■ Keep the bearing block still when blowing ■ Install the elastic circlip properly.
dry the bearing after washing clean. Apply Turn the circlip after assembling to make
oil or lubricant before assembling. Sure is has been installed into the slot.