CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 62 / 241

3-14
CFMOTO
Checking the exhaust
To ensure the required insert depth of the sensor
(60cm), Use a connector and connect it to the
muffler.
After strictly adjusting the idle speed, measure the
density of CO (CO%) and HC (HC%).
CO% at Idle speed: below 4.5%
HC% at idle speed: below 1200ppm
If the density of CO/HC exceeds the rated value,
readjust according to following steps:
Clip the secondary air supplying hose with clamp to
cut the supply of secondary air.
Start the engine and adjust idle speed if necessary
Idle speed: 1600 ¡À 150r/min
Note
When secondary air inlet is stopped, the idle speed
will change. When the idle speed is more than da-
tum value, adjust when the state of secondary air
inlet is cut.
After strictly adjusting the idle speed, measure the
density of CO (CO%) and HC (HC%).
CO% at Idle speed: below 4.5%
HC% at idle speed: below 1200ppm