CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 66 / 241

3-18
CFMOTO
Exhaust gas recycling device
Check if there ’ s any deposit in the discharge duct
for exhaust gas/mist separation. (at right bottom of
air filter).
If there
’ s deposit, remove the discharge plug; drain
the deposit in pipe. Install the discharge plug and fix
it with the clamp.
Anti-diffusion device for CO
Remove the right and left protecting plates(2-3).
Check the reed valve inlet hose between control
valve of secondary air inlet and cylinder head cover
to see if there is drop, aging or damage. Replace in
case of any abnormal.
Check the control valve vacuum tube to see if there
is drop, aging or damage. Replace in case of any
abnormal.
Check the hose between secondary air inlet control
valve and air filter body to see if there is drop, aging
or damage. Replace in case of any abnormal.
Enginery Checking
Start and warm – up engine.
Remove the hose between secondary air inlet con-
trol valve and air filter body.
Check the outlet of secondary air intake on the air
filter body for any carbon laydown or deposit.
Replace control valve of secondary air intake in case
of any carbon laydown or deposit.