CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 65 / 241

3-17
3 Inspection, Adjustment
3
When the coolant level is below the lower limit, re-
move the two tapping screws of the front emblem
plate, and then the front emblem plate. Remove sec-
ondary water tank
’ s cover, add coolant till the up-
per limit (coolant or diluted original liquid).
Recommended coolant: CFMOTO coolant
Standard density: 30%( Freezing temperature
of coolant varies according to the different mix-
ture ratio. Adjust the mixture ratio according
the lowest temperature in the place where the
vehicle is used.)
If the coolant reduces very fast, check if there is any
leakage
The cooling system may be mixed with air when
there is no coolant in the
secondary water tank and the air should be let out
before filling coolant.
Coolant Leakage
Check radiator pipeline, water pump, water pipes and
joints for leakage.
In case of any leakage, dismantle and do further check.
(Refer to Part 6)
Check the radiator pipeline for aging, damages or
cracks;
The rubber hose will naturally get aged after a period
of service time and frequently being heated. As the
aging goes on, the hose may get cracked when the
cooling system is heated. Nip the hose with fingers
and check if there are any tiny cracks.
In case of any abnormal, replace with a new hose.
Check the clamps of the coolant pipes. Tighten prop-
erly in case of any slacking.
For dismantling of radiator, please refer to (6-8).
Check on the radiator fins for mud and dust or damage.
Correct the bending of fins; clean the mud with water
and compressed air.
When the damaged area of the radiator fin is over
20% of the whole area, replace with a new radiator.
(6-8)
Refer to P. 6-4 for replacing the coolant.