CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 67 / 241

3-19
3 Inspection, Adjustment
3
Remove the joint hose between air filter body and
control valve of secondary air intake.
Remove the vacuum tube of control valve of sec-
ondary air inlet from the T joint.
Install block on T joint.
Connect vacuum tube of control valve of second-
ary air intake to vacuum pump.
Start the engine and slightly increase the throttle.
Under the above state, check is secondary air is
sucked into the tube between air filter body and
secondary air control valve.
If now air is sucked, check if there is blockage in
the tube between air filter body and secondary air
control valve.
Input 450mmHg vacuum pressure to the vacuum
tube of secondary air control valve and check if the
hose between air filter body and secondary air con-
trol valve stops breathing in the secondary air.
If intake of secondary air is not stopped or the
450mmHg vacuum pressure could not be
maintained, replace with a new secondary air con-
trol valve.
Lighting device
Adjusting the screw for headlight beam
Adjust the screw with a “ + ” type screwdriver and
adjust the high/low beam.