CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 224 / 241

18Light, Instrument, Switch
18
18-3
Replacement of bulb
Head light bulb
Note
Headlight bulb has larger power and the tem-
perature is very high when it si turned on. Do
not touch it after it is just turned off. Opera-
tion should be done when the bulb is cooled
down
.
Remove head light comp. (18-5)
Disconnect headlight 4p coupler.
Remove dust-proof cap, head light clamp, and
pull out socket and replace with a new bulb.
Note
Wear clean gloves when replacing bulb. Oil
stains on the glass surface may cause break
of bulb. Clean the stained surface with
alcohol.
Make sure that the three positioning pins of
the bulb should be in line with the three posi-
tioning holes in the socket when replacing the
bulb.
Bulb specification: 12V-35/35W
Reverse the removal procedure for installation.
After replacing the bulb, adjust head light beam.
(3-19)
Inspection of headlight
Turn the ignition switch to ON position, turn light
switch to the illuminating position and check if
the headlight is on.
— ON: Normal
— Still off: Breaking or short circuit of main
cable.