CF MOTO CF125T-19 2003, Руководство по обслуживанию

Страница: 175 / 241

13-2
CFMOTO
Special tools
Shaft, bearing remover 07746-0050100
Remover head 10mm, bearing remover 07746-0050100
Handle A , press tool 00749-0010000
Press tool outer sleeve 07946-1870100
Guide tool 10mm 07746-0040100
Locknut spanner 07916-KM10000
Bearing adjusting spanner, steering column 07SMA-GBC0100
Bearing remover set, 07JAC-PH80000
Rotor puller 07JAC-PH80100
Remover shaft 07JAC-PH80200
Remover hammer 07741-0010201
Bearing seat mounting tool A 27x47mm, steering column 07YMF-GEE0100
Bearing seat mounting tool B 30x47mm, steering column 07YMF-GEE0200
Assembling tool shaft 07VMF-KZ30200
Troubleshooting
Heavy steering
· Upper thread is over tightened.
· Steering bearing is damaged or worn out.
· Inner & outer bearing seats are damaged, worn
out or stepped.
· Steering column is distorted
· Tire pressure is too low.
· Worn tire
Loosened Handlebar
·
Steering bearing is damaged, or not well tightened.
· Right and left shock absorbers are not matched.
· Front wheel axle is distorted,
· Frame is deformed
· Worn tire
· Rocking of wheel bearing
· Engine fixing part is rocking. (refer to chapter 7)
Front wheel wobbles
· Deformed rim
· Faulty wheel bearing
· Faulty tire
· Improper balance of wheel
· Improper tightening of wheel axle
Wheel cannot turn freely
· Wheel bearing is faulty.
· Front wheel axle is bended.
· Brake drag
Too soft front suspension.
· Weakened front shock absorber
· Low tire pressure
Front suspension is too hard.
· Front shock absorber is bended.
· Tire pressure too high.
Abnormal noise with Front absorber
·
Faulty front shock absorber
· Loosening of tightening parts of front shock ab-
sorber
Poor brake
· Improper brake adjustment
· Stained or damaged brake disc.
· worn brake shoe.