Ceyear 3943B, Руководство по эксплуатации

Страница: 82 / 167

5. Menus
5.2 Window menu
74
Set the dwell time with the range of 0~60s. The default setting is 500ms, and the dwell time mode is valid
when set to manual.
[No Signal Time State]
Set the no-signal time state, including on and off. The default setting is on.
[No Signal State Dwell Time]
Set the no-signal state dwell time. The range is 0~60s, and the default is set to 0s. No-signal time state is
valid when open.
[Differential Mode]
Set the differential display of the spectrum. Differential mode will display when it is on, and it is in normal
display when it is off.
2) Display
The corresponding display property pages of the RF panorama window in frequency scan mode are the
same as those in Section 5.2.2.3, Panorama Scan Mode.
3) Window selection
The window selection property page corresponding to the RF panorama window in list scan mode is the
same as the window selection property page under 5.2.1.2 IF panorama window.
5.2.4.5 RF waterfall window
The parameter setting dialog corresponding to the RF waterfall window in list scan mode contains three
property pages: measurement, display and window selection.
1) Measurement
The measurement property page corresponding to the RF waterfall window in list-scan mode is the
same as the measurement-related property page corresponding to the RF panorama window in 5.2.4.4
Scan the list mode.
2) Display
The display property pages corresponding to the RF waterfall window in list scan mode are the same as
the display-related property pages corresponding to the RF waterfall window in 5.2.2.4 panorama scan
mode.
3) Window selection
The window selection property page corresponding to the RF waterfall window in list scan mode is the
same as the window under 5.2.1.2 IF panorama window
Select the property page.