Certikin COH110 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 96

background image

HEATER CONNECTIONS

Fig. 7:2c

7:

COMMISSIONING

7:1 GENERAL INFORMATION

It is essential in the interest of Heater efficiency and
reliable performance that once the Heater has been
installed it is first commissioned by a qualified OFTEC
engineer.

If an engineer is not known the Manufacturer will be
pleased to provide details of an approved commis-
sioning and servicing engineer from their list of
OFTEC approved engineers.

7:2 FILLING THE HEATER
Pool Heating Only

1.  The Heater is pre-filled with enough Sentinel X100
     Inhibitor to protect the Heater.
2.  Fill using the filling loop provided and inspect
     for leaks on all the joints inside the heater.
3. Due to movement in transit some factory made
     joints may require remaking or tightening

after installation.

4. Pressurise the Heater to 1 bar, then, after turn-
     ing off both valves on the filling loop, disconnect
     the filling loop from one end.
5. With the Oil supply turned off, power up the
     Heater with a call for heat so that the internal
     pump runs. See 3:5 for pump speed setting

6. Stop pump by turning off the supply so as to let

air settle, then vent.

7. Repeat steps 5 and 6 until no more air can be

heard or vented.

8. Check that all three Sensors are fully in to

their respective pockets.

9. Turn on the oil supply.

For Pool & Space Heating

1. Fill and flush the pipework and space heating.
2. Connect to the Heater and fill the complete
    system using the Filling Loop provided.
3.  Inspect for leaks on all the joints inside the
    heater. Due to movement in transit some factory
    made joints may require remaking or tightening
    after installation.
4. Add Sentinelk X100 Inhibitor to the recommended
    strength.
4. Pressurise the Heater to 1 bar, then, after turn-
   ing off both valves on the filling loop, disconnect
   the filling loop from one end.
5. With the Oil supply turned off, power up the
    Heater with a call for heat so that the internal
    pump runs. See 3:5 for pump speed setting
6. Stop pump by turning off the supply so as to let

air settle, then vent.

7. Repeat steps 5 and 6 until no more air can be

heard or vented.

8. Check that all three Sensors are fully in to

their respective pockets.

9. Turn on the oil supply.

HYDRAULIC SCHEMATIC

Fig. 7:2b

19-12-05

28

«
...
72
73
74
75
76
...
»

Содержание COH110

































































































Отзывы:

Нет отзывов

Похожие инструкции для COH110

Бренд: wallas Страницы: 39

Бренд: Unidare Страницы: 3

Бренд: EINHELL Страницы: 38

Бренд: Frost Fighter Страницы: 30

Aeromax Piscine 10

Бренд: Thermor Страницы: 32

RAC15HL ScreenZone

Бренд: Claudgen Страницы: 20

Бренд: La Hacienda Страницы: 5

Бренд: Mepu Страницы: 28

Бренд: Scarlett Страницы: 14

Бренд: KDK Страницы: 17

Бренд: Varma Tec Страницы: 20

Бренд: Vicko Страницы: 9

Бренд: Far Group Страницы: 12

Бренд: Bard Страницы: 38

Бренд: Raypak Страницы: 41

AHCG3/HCG3100T150

Бренд: American Water Heater Страницы: 40

Wonderluxe B2350

Бренд: United States Stove Страницы: 12

Бренд: Hirschmann Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды