manualshive.com logo in svg

Centrometal CPREG-Touch, Техническое руководство, Страница: 43 / 114

Поделиться
Скачать
Centrometal CPREG-Touch Скачать руководство пользователя страница 43

Operation mode

Technical instructions CONTROLLER - 

CPREG-Touch 

43

This option enables to set working mode

Possible selection:

 

- Factory: DHW 

(unless the basic equipment doesn't have any 

  heating circuit)
- Options: DHW, AUTO DHW<>Heat. + DHW, DHW

5.9.  WORK MODE

5.10.1.  EXTINGUISHING FOR CLEANING

This option is used for enabling and disabling Extinguishing for cleaning 
option. If this option is enabled the burner automatically starts extinguishing 
phase for grate cleaning / blowing an ash off the grate after continouos 
working  time  in  the  set  time  ''Time  to  burner  extinguishing''  (if  burner 
extinguishing conditions are not fulfilled, the burner is automatically started 
again after extinguishing phase).

Note:

Depending  on  a  pellet  quality,  that  are  used,  it  is  recommended  to 
occasionally switch the burner off and clean the burner grate with fan (or air 
cleaning – additional equipment).

Possible selection:
- Factory: ON
- Options: ON, OFF

DHW

 - this mode is possible if there are both heating circuits and DHW, the heating and DHW tank are 

controlled according to set conditions.

AUTO DHW<>Heat.+DHW

  - This mode is possible if there are both heating circuits and DHW, the controller changes 

DHW and DHW mode according to set conditions (outside temperature) and it automatically adjusts the system 
to the selected working mode and to the selected working mode conditions.

DHW 

- this mode is possible if there are both heating circuits and DHW, but DHW mode is manually or automatically 

selected, or there are no heating circuits, just DHW.

Note:

If DHW is used in configurations X7Y and X8Y over CM2K module, in DHW mode DHW over CM2K is disabled. If a 
customer wants to use DHW over CM2K, all heating circuits must be manually disabled in CM2K and DHW 
mode must be selected.

5.10.2.  TIME TO BURNER EXTINGUISHING

Содержание CPREG-Touch



















































































































Отзывы:

Нет отзывов