8
0,5 – 1,5
2,
0,5 – 1,5
2,5-4
2,5
0,5 0,75 1,0 1,5
2,5
3 Starting up and operating
3.1
Selecting the installation site
3.2
Determine the cross section
Check that the EPB-1N is equipped for the desired cross section. If necessary, upgrade the
EPB-1N (see "Retrofitting" on page 14).
5
KIT2.5-EPB1N necessary
Figure 3-1 Example of EPB-1N (value in mm²)
NOTE: For operation and storage, avoid the following:
–
humid or dusty places and
–
locations exposed to high levels of heat, direct sunlight or low temperatures
(operating range: 15°C ... 35°C).
NOTE:
If the machine is moved from a cold location to a warm location, condensation
can form.
•
Before using the EPB-1N, open the front door and allow condensation to evaporate.
NOTE:
•
Do not spill liquids on the EPB-1N
•
Do not expose the EPB-1N to strong vibrations or shocks.
NOTE:
•
Protect the compressed air hoses from heat, oil and sharp edges.
NOTE:
The device must be set up on a level and horizontal surface.
0,5 – 0,75
0,75 – 1,5
