3
1.2
Work sites
1.3
For your safety
For safety reasons, the EPB-1N automatically switches itself off if the compressed air
is disconnected.
NOTE:
If the machine is moved from a cold location to a warm location, condensation can
form.
•
Before using the EPB-1N, open the front door and allow condensation to evaporate.
NOTE:
•
Do not spill liquids on the EPB-1N.
•
Do not expose the EPB-1N to strong vibrations or shocks.
NOTE:
•
Protect the compressed air hoses from heat, oil and sharp edges.
WARNING:
•
Only use filtered compressed air with a maximum pressure of 6 bar.
WARNING:
•
Only operate the EPB-1N when the front door is closed.
•
Disconnect the mains plug and the compressed air plug prior to all work that requires
opening the front door (e.g., retrofitting, remedial action).
•
Switch off the EPB-1N and disconnect the device from the compressed air during
a break or when the device is not in use.
•
Do
not
pull on the compressed air hose to disconnect the compressed air.
•
Make sure that there are no foreign objects inside the housing.
NOTE: For operation and storage, avoid the following:
–
humid or dusty places and
–
locations exposed to high levels of heat, direct sunlight or low temperatures
(operating range: 15°C to 35°C)
WARNING:
The front door is installed for the safety of the operator. Under no
circumstances must it be modified, removed or bypassed using attachments.
WARNING:
•
Before opening the housing, disconnect the mains plug and disconnect the device
from the compressed air.
