15
Changing the sleeve receiver
•
Remove the reversing base sleeve (see page 14).
•
Pull the sleeve receiver (1) upwards, remove from the holder
and insert into the transport holder (2).
•
Insert the sleeve receiver into the holder using the desired
cross section (3) and push downwards (4).
•
Install reversing base sleeve.
Changing the cord-centering funnel
•
Remove the reversing base sleeve and sleeve receiver
(see above).
•
Slide the slide (1) upwards and pull the holder (2) forwards.
•
Remove the second holder in the same way.
•
Remove both cord-centering funnels (3).
•
Attach the cord-centering funnels onto the driving pins (5) with
the desired cross section (4).
•
Attach the holders (6) and press the slide (7) downwards.
•
Install the sleeve receiver and reversing base sleeve.
The sleeve receiver must be changed every time the
cross section is changed.
NOTE:
Check for correct lock-in position.
The cord-centering funnels must be changed
during a 0.5...1.5 ↔ 2.5 cross section change.
