12
4.2
Adjusting and changing the stripping blade
Removing the stripping blade
•
Pull the release lever (1) forwards.
•
Remove the reversing base sleeve (2) downwards.
•
Pull the sleeve receiver (1) upwards, remove from the
holder (2).
•
Slide the slide upwards and pull the holder (2) forwards.
•
Remove the second holder in the same way.
•
Remove the cord-centering funnels (3) to the left and right.
•
Take out both the left and right stripping blades (4).
•
Worn-out or damaged blades must be replaced.
•
If the blades are still in working order, the malfunction can be
rectified by correcting the incision depth on the right-side
blade.
WARNING: Risk of injury!
Disconnect the mains plug and the compressed air
before you open the front door.
WARNING: Risk of injury!
The stripping blades are sharp. Be careful not to injure
yourself.
