2
1 Basic information
For safe handling and trouble-free operation of the EPB-1N, you must be familiar with and
observe the safety notes.
1.1
Intended use
With the EPB-1N, you can either:
–
Strip conductors automatically or
–
Strip conductors automatically and crimp with end sleeves.
Flexible conductors of class 2, 5, and 6 standard according to DIN VDE 0295 and end
sleeves Cembre products series PKE, PKC, PKD are processed.
Permitted operators
Only authorized and instructed operators may work with the EPB-1N.
The operator is responsible for all other persons within the workspace.
The owner must
–
make the user manual available to the operator and
–
ensure that the operator has read and understood it.
NOTE:
Correct usage includes observing all notes and complying with the predefined
operating conditions.
WARNING:
The EPB-1N may only be used
–
as intended and
–
when in safe and fault-free condition.
WARNING:
All persons responsible for commissioning, operating and maintenance of
the EPB-1N must
–
be appropriately qualified and
–
adhere strictly to this user manual.
WARNING:
The EPB-1N is intended solely for stripping and crimping.
In doing so, the conductor and end sleeves with cross section or sleeve length
according to "Suitable end sleeves and retrofit kits" on page 5 are to be used.
Only the insulated conductors may be inserted into the insertion funnel on the EPB-1N
for processing. Under no circumstances should solid metal parts or other similar
objects be inserted. This damages the stripping blade.
Unauthorized conversions that exceed the scope of modification, and changes to the
EPB-1N are not permitted for safety reasons.
NOTE:
Use only Cembre end sleeves and original spare parts
