16
Changing the separation plates
•
Unscrew the separation plate (1) using the hexagonal wrench
and remove (2)
•
Remove the separation plate from the retrofit kit with the
desired cross section and attach in place of the previous
separation plate.
5.2
5.2
Changing the crimping length
Changing the crimping length
Changing the rotary dial
•
Follow the steps mentioned above to remove the stripping
blade and crimping jaws (see page 15).
•
Insert the rotary dial (1) at the desired crimping length using a
screwdriver.
The selected value is shown via the red marker (2).
•
Re-attach individual parts.
The separation plates must be changed during a
0.5...1.5 ↔ 2.5 cross section c hange.
The crimping length is changed using a rotary dial.
