246
USING THE CAMERA
W
ITH A COMPUTER
2.
Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your Macintosh.
•
Orient the USB pl
u
g so it correctly matches the shape of
the USB port
w
hen yo
u
connect them.
•
Pl
u
g the USB ca
b
le into the ports sec
u
rely, as far as it
w
ill
go. Proper operation is not possi
b
le if connections are not
correct.
3.
Press the camera’s [ON/OFF] button to turn it
on and then press [MENU].
•
Do not place the camera on the USB cradle yet.
4.
On the “Set Up” tab, select “USB” and then
press [
X
].
5.
Use [
S
] and [
T
] to select “Mass Storage” and
then press [SET].
6.
Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
•
Do not place the camera onto the USB cradle
w
hile it is
t
u
rned on.
•
If yo
u
plan to transfer images from the camera’s
bu
ilt-in
memory to yo
u
r Macintosh, make s
u
re there is no
memory card loaded in the camera.
[
] (USB) Connector
Connector A
Connector
Mini-B
USB Cable (Bundled)
USB Port