Casada bodysense POWERBOARD 3.0, Руководство пользователя

Страница: 23 / 91

44 45
Especially in the frequency range from 15Hz!
•
acute migraine
•
recent implants, e.g. hip or knee replacement
•
recent fractures
•
gallstones / kidney stones
•
phlebitis, thrombosis
•
epilepsy
•
tumours and metastases, bone cancer
•
acute inflammation
•
acute illness
•
pacemaker
•
pregnancy
•
severe osteoporosis with fractures caused by osteoporosis
•
severe diabetes with severe circulatory disorder (gangrene, retina)
•
metal or ceramic implants less than 6 months old in the areas of the body being trained
•
fresh wounds and surgeries
•
stents and bypasses less than 6 months ago
•
untreated high blood pressure
•
severe heart failure per NYHA > class I
•
recent fractures
•
hernias
Possible side effects of the vibration training
•
tingling in muscles
•
itching of skin
•
increased pain due to too high training intensity
•
temporary drop in blood pressure
•
short-term hypoglycaemia
Should the contraindications be viewed as absolute?
If you are affected by one of the contraindications listed above, it does not mean that you are ab-
solutely forbidden to do vibration training. In this case, we recommend you consult your physician.
The vibration platform can be used in addition to your usual therapy if this is recommended by your
physician or a physiotherapist.
Contraindications Troubleshooting
Storage | Care
Regular care will extend the life of your PowerBoard 3.0 whilst also ensuring safe operation at all times.
1. Recommended storage: dry, free of dust. Please wind cord.
2. Keep liquids and open fire away from the PowerBoard 3.0.
3. Clean the equipment using a dry, soft cloth.
4. Always unplug the PowerBoard 3.0 when not in use.
MALFUNCTION SOLUTION
The remote control does not
work.
• Check that the batteries are inserted correctly.
• Change the batteries.
The device shows no
functions.
• Check the connection of the electricity cable to the power outlet
and the connection at the device.
• Attempt to activate the device using the remote control and the
power switch on the device.
The device independently
performs functions that were
not selected (exception:
automatic programmes).
• Switch the device off, disconnect from the mains, and wait for
20 seconds. Reconnect the device and switch the device back
on (Restart for malfunction).
Signal interference. • There are too many sources of interference nearby, for your
PowerBoard and pulse sensor, to work properly. Change your
position and rescan for a signal.
Should any malfunctions not be remedied by the above-mentioned solutions or should other problems
arise, please contact your Casada partner to receive professional and individual advice and solutions
for the problem at hand. Your Casada partner will be glad to help you solve any malfunctions fast
and professionally.
ATTENTION!
Electromagnetic blocks may cause signal interference. These can occur around high-voltage power
lines, traffic light signals, overhead wiring for electric railways, buses or trams, televisions, car
engines, bicycle computers, some motorised exercise equipment, mobiles, or when passing electric
safety gates. This will repeatedly result in inaccurate heart rate measurements.
CONTRAINDICA
TIONS
TROUBLESHOOTING | STORAGE | CARE