Carver Yachts 38 Super Sport, Руководство пользователя

Страница: 89 / 126

3827 • U2 3/10 7
O
perating and
M
aneuvering
S
ectiOn
6
You may also need to anchor in a strong wind. If you drop your spare
anchor, make sure the two anchors are laid out at an angle. If both
anchors are set in-line and one of them drags, it may cut a trough for the
other anchor to follow.
Stern Anchors
In some anchorages, boats use bow and stern anchors at the same time.
To get these anchors down, drop the bow anchor first, then pay out extra
anchor line (15-18 times the depth). Drop the stern anchor and adjust the
length of line payed out on both anchors as necessary.
Mooring Lines
It’s a good idea to familiarize yourself with mooring line terminology and
using mooring lines. If necessary, obtain training on mooring your boat.
Learn how and when to tie the various knots used in seamanship. Boats
that are not moored correctly can suffer and cause serious damage. The
following information serves only as a guide to mooring your boat.
The mooring illustration demonstrates possible mooring lines for a small
vessel. These lines include the (1) bow line, (2) after bow spring, (3)
after
quarter spring, (4) stern lines and (5) forward quarter spring. Of the two
dockings shown, the left one shows how to tie up when docking your boat
in an alongside berth. The docking shown on the right is used when tying
up at four corners of the boat.
1
2
3
5
1
2
3
4
https://www.boat-manuals.com/