Carver Yachts 38 Super Sport, Руководство пользователя

Страница: 39 / 126

3827 • U2 6/10 11
DC E
lECtriCal
S
yStEm
S
ECtion
2
Problem
12-volt equipment does
not function.
Individual 12-volt
component does not
function.
Cabin lights do not come on
or are dim.
Battery does not hold a
charge.
Engine is running and
voltmeter does not indicate
adequate voltage.
Possible Cause
Accessory Battery master
disconnect switch is in the OFF
position.
Main-One or Main-Two circuit
breaker on the Safety Breaker
Panel is OFF.
DC Main circuit breaker on the
DC Control Center is OFF.
Main circuit breaker on the DC
Control Center is OFF.
Battery is weak or dead.
Circuit breaker for that
component is OFF or tripped.
Battery is weak or dead.
A wire within the 12-volt system
is loose or disconnected.
The appropriate circuit
breaker(s) on the DC Control
Center is OFF.
Battery is weak or dead.
One or more light bulbs are
burned out.
Battery failed.
Engine alternator belt
is loose.
Possible Solution
Turn the switch to the
ON position.
Turn both circuit breakers ON.
Turn both circuit breakers ON.
Turn both circuit breakers ON.
Start the engines or activate
the appropriate battery charger.
Switch the circuit breaker for
that component ON.
Start the engines or activate
the appropriate battery charger.
Locate and repair the wire.
Switch circuit breaker(s) ON.
Start the engines or activate
the engine/accessory battery
charger.
Replace light bulb(s).
Replace with a new battery.
Refer to engine OEM
information to tighten the belt.
https://www.boat-manuals.com/