Wheel balancer 80-2000T. Operation Manual
p.19
19
а
б
Figure 5.4 – Taking measurements by the gauge arm
When you press
ESC
the dimensions will return to the initial values as before the
measurement start and the machine will be switched over to the state «New wheel».
After measuring diameter and distance the machine automatically switches into weight
setting scheme and width input.
The current scheme is marked on a display by the coloured frame, Figure 5.5.
For choosing another scheme press
ALU
and
ALU
.
Figure 5.5 – Choosing the weight setting scheme
If after choosing the scheme the
WIDTH
keys are activated (contrast) you should enter
the wheel width.
Measure the wheel width
by the caliper, Figure 5.6. Enter width by pressing
WIDTH
and
WIDTH
.
