Wheel balancer 80-2000T. Operation Manual
p.14
14
- interrupt any action, finalize parameters change and restore previous settings;
- move to the previous level of the menu;
- change parameter setting;
- choose screen elements (menu item, weights setting scheme,
etc.)
Further the soft keys are indicated in the frame, for example
OK
.
Functions of the other keys:
START
- shaft turning and imbalance measurements start
STOP
- emergency wheel stop during the imbalance measurement, temporary brake
engagement while wheel dismounting and mounting.
4.4 Using the menu
Menu is used for operating some machine functions.
To enter the main menu in the «New wheel» state press
MENU
. The display shows
a list consisting of some items, Figure 4.9.
To choose a menu item press
UP
DOWN
, mark the item you need and press
EXECUTE
.
Figure 4.9
Other menu items meaning and their usage will be described in other sections.
4.5 Switching the wheel balancer
Before switching it’s necessary to make sure that the gauge arm is in the initial position
(Figure 4.10).
Move the mains switch to the position
ON
.
On the monitor screen for some seconds there will be information on version number of
the machine, then - page of a choice of language in the form of several flags. The current
choice is shown by a brighter flag in the frame. Press to change chosen setting
or
,
