Page 73
3.6.12 AMD
Figure 3-85 AMD Configuration Interface
See Figure 3-85 for the AMD Configuration interface. which is to set the parameters for judging
whether the phone is picked up by a man or not. The table below explains the items shown in the
above figure.
Item
Description
AMD Detection for
Outgoing Call
Sets whether to enable the AMD detection while making an outgoing call, with the
default value of
Disabled
.
Line Silence Overtime
after Dial Tone
Judges if the line silence after dial tone lasts overtime or not, calculated by ms,
with the default value of
30000
.
Silence Overtime after
tone or Color Ring
Being Detected
Judges if the silence after tone or color ring lasts overtime or not, calculated by
ms, with the default value of
15000
.
Overtime for a
Complete AMD
Detecting Process
Judges the whole AMD detecting process overtime or not, calculated by ms, with
the default value of
70000
.
Upper Limit of Detected
Continuous Tones
Judges if the tone detected time is overtime or not.
Shortest Voice Duration
at ON State
Sets the shortest duration when the voice goes into the High voltage state,
calculated by ms, with the default value of
150
.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
