Page 108
indicates any string. These two configuration items together with
Call Initiator
specify a number manipulation rule for calls.
Note:
“[*]” represents DTFM symbol *, while “*” represents any string; Multiple
CallerID/CalleeID prefixes can be added simultaneously. They are separated by
“:”.
Stripped Digits from
Left
The amount of digits to be deleted from the left end of the number. If the value of
this item exceeds the length of the current number, the whole number will be
deleted.
Stripped Digits from
Right
The amount of digits to be deleted from the right end of the number. If the value of
this item exceeds the length of the current number, the whole number will be
deleted.
Reserved Digits
from Right
The amount of digits to be reserved from the right end of the number. Only when the
value of this item is less than the length of the current number will some digits be
deleted from left; otherwise, the number will not be manipulated.
Prefix to Add
Designated information to be added to the left end of the current number.
Suffix to Add
Designated information to be added to the right end of the current number.
Note: The number manipulation is performed in 5 steps by the order of the following
configuration items:
Stripped Digits from Left
,
Stripped Digits from Right
,
Reserved Digits
from Right
,
Prefix to Add
and
Suffix to Add
.
After configuration, click
Save
to save the settings into the gateway or click
Close
to cancel the
settings.
Click
Modify
in Figure 3-130 to modify a number manipulation rule. See Figure 3-132 for the
Tel
IP CallerID manipulation rule modification interface. The configuration items on this interface
are the same as those on the
Add Tel
IP CallerID Manipulation Rule
interface. Note that the
item
Index
cannot be modified.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
