Page 100
After configuration, click
Save
to save the settings into the gateway or click
Close
to cancel the
settings.
See Figure 3-120 for the Tel
IP routing rule configuration interface after your configuration.
There is a rule displayed with Index 63, Destination IP
„192.168.1.101‟ and Destination Port „5060‟
(i.e. default IP address and port of the gateway), having no restriction on Call Initiator, CallerID
Prefix and CalleeID Prefix, which indicates all the outgoing calls from Tel which conform to the
dialing rule will be routed to the gateway.
Figure 3-120 Tel
IP Routing Rule Configuration Interface
Click
Modify
in Figure 3-120 to modify a routing rule. The configuration items on the Tel
IP
routing rule modification interface are the same as those on the
Add New Routing Rule (Tel
IP)
interface. Note that the item
Index
cannot be modified.
To delete a routing rule, check the checkbox before the corresponding index in Figure 3-120 and
click the
Delete
button.
Check All
means to select all available items on the current page;
Uncheck All
means to cancel all selections on the current page;
Inverse
means to uncheck the
selected items and check the unselected. To clear all routing rules at a time, click the
Clear All
button in Figure 3-120.
See Figure 3-121 for the Tel
IP Routing Rule Configuration Interface under the Character mode.
You can edit the routing rule list to add a new one or modify an old one. The exact meaning of
each element of the rule is described on the page.
Figure 3-121 Tel
IP Routing Rule Configuration Interface (Character)
3.10 Number Manipulation
Number Manipulation includes four parts:
IP
Tel/IP CallerID
,
IP
Tel/IP CalleeID
,
Tel
IP
CallerID
and
Tel
IP CalleeID
. See Figure 3-122.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
