Page 11
Example:
Provided the added port is Port1, check the checkbox before
Port1
, set
Index
to
1
,
fill in
Description
with
test
, and keep the default values of other configuration items.
2.
Go to
„Route Settings
IP
Tel/IP
‟ on the WEB interface and click the „Add New‟ button to
add a new routing rule. Refer to
3.9.2 IP
Tel/IP
for detailed instructions. Fill in
„Source IP‟
with the IP address which initiates the call and select the port group created in Step1 as
„Destination Port Group‟. You may use the default values of other configuration items and
required not to leave
„Description‟ empty.
Example:
Provided the IP address of the IP phone which initiates the call is 192.168.0.111.
Set
Index
to
63
,
Destination Port Group
to
1
, fill in
Description
with
test
, configure
Source
IP
to
192.168.0.111
, and keep the default values of other configuration items.
3.
Pick up the IP phone and call the IP address and port of the wireless gateway to make
outgoing calls from the wireless channel.
Example:
Provided the IP address of the wireless gateway is 192.168.0.101, the port is 5060,
use the IP phone to call the IP address [email protected] and then the first idle
wireless port in the port group of step 2 will make an outgoing call to 13529101232.
Special Instructions:
As the device will gradually heat up while being used, please maintain good ventilation to
prevent sudden failure, ensuring that the ventilation holes are never jammed.
During runtime, if the alarm indicator lights up or flashes, it indicates that the device goes
abnormal. If you cannot figure out and solve the problem by yourself, please contact our
technicians for help. Otherwise it may lead to a drop in performance or unexpected
errors.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
