Page 94
Port Select Mode
When the port group receives a call, it will choose a port based on the select mode
set by this configuration item to ring or to connect. The optional values and their
corresponding meanings are described in the table below.
Option
Description
Increase (default)
Search for an idle port in the ascending order of the port
number, starting from the minimum. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Decrease
Search for an idle port in the descending order of the port
number, starting from the maximum. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Cyclic Increase
Provided Port N is the available port found last time.
Search for an idle port in the ascending order of the port
number, starting from Port N+1. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Cyclic Decrease
Provided Port N is the available port found last time.
Search for an idle port in the descending order of the port
number, starting from Port N-1. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Group Ringing
Ring all the idle wireless ports in this port group.
Color Ring
Sets whether to enable the color ring feature or not, with the default setting of being
disabled
.
Note:
Only when there are available color rings and the
“Port Select Mode” is set to
Grouping Ringing will this item appear.
Color Ring Index
The index of the color ring which is quoted by the current wireless port.
Port
The ports in the port group. If the checkbox before a port is grey, it indicates that the
port is not available or has been occupied. All selected ports for a port group will be
displayed in the
Ports
column in Figure 3-109. Note: When a port group contains
multiple ports, the automatic call forward feature is invalid.
After configuration, click
Save
to save the settings into the gateway, click
Cancel
to cancel the
settings.
Check All
means to select all available ports on the current page;
Inverse
means to
uncheck the selected items and check the unselected.
Click
Modify
in Figure 3-109 to modify the properties of a port group. See Figure 3-111 for the
Port Group Modification interface. The configuration items on this interface are the same as those
on the
Add New Port Group
interface.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
