Page 80
Time Limit on a Single
Day
Sets whether to enable the time limit on calls in a single day.
Switch to Other Card if
no Time
Sets whether to switch to other available SIM card if the current SIM card has no
available time to make calls.
Time Limit on Total
Calls
Sets whether to enable the time limit on all calls at the port.
Timing Cycle
Sets the time count cycle for the port.
Clear
Sets the time node to clear the time count.
Set Spent Call Time
Sets the spent call time length of the port.
Alarm for Call Time
Allowance
Once this feature is enabled, when the remaining call time of the port is less than
the alarm threshold value, the gateway will send the alarm information.
Allowance Alarm
Threshold
Sets the threshold value for the remaining call time.
Alarm via SSM, Alarm
via Email
Sets the way to send the alarm information. The gateway can send the alarm
information via both SMS and Email or either of them.
Apply to Other Ports
Sets whether to apply above settings to other ports or port groups.
Click
Modify
to save the settings into the gateway, click
Reset
to restore the configurations, or
click
Return
to cancel the settings.
Note:
This feature is unsupported in the SimBank mode.
3.7.3 Name List Timer
Figure 3-95 Name List Timer Interface
See Figure 3-95 for the Name List Timer interface, which contains two parts: Port Timing and
Name List Timer Rule. You can add the timing rule to count the call time for the port. Click
Add
New
in Figure 3-95 to add a timing rule. See Figure 3-96.
Note:
This
configuration
is
unavailable
for
CMG4004
and
CMG4008
series
gateway.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
