Page 125
Fill in a piece of command to the item Command and click
Save
to save the settings to the
gateway. Click
Close
to cancel your settings. Click
Apply
to make the new command valid.
Click
Modify
in Figure 3-157 to modify a command. See Figure 3-159 for the Access Control
Command Modification interface. The configuration items on this interface are the same as those
on the
Add Access Control Command
interface. Note that the item
Index
cannot be modified.
Figure 3-159 Access Control Command Modification Interface
To delete an Access Control Command, check the checkbox before the corresponding index in
Figure 3-157 and click the
Delete
button, and then click the
Apply
button to make the deleted
command invalid.
Check All
means to select all available items on the current page;
Uncheck All
means to cancel all selections on the current page;
Inverse
means to uncheck the selected items
and check the unselected. To clear all access control commands at a time, click the
Clear All
button in Figure 3-157.
Note:
1, Currently, only the command iptables is supported by the gateway.
2, If you add or modify or delete commands manually, don
‟t forget to click the
Apply
button to
make your settings valid. However, if the gateway restarts or the configuration is leading-in, you
need not click the
Apply
button and the commands will get valid automatically.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
