Page 40
3.5.4 Dialing Rule
Considering efficiency, it is not acceptable that the gateway reports to the PBX or relevant devices
every time it receives a number. Instead, we hope that the gateway can automatically judge the
received number to see if it meets the set rule, if it is complete and if it is qualified to make
outgoing calls. Therefore, a whole dialing plan, which consists of multiple dialing rules specifying
the auto judging conditions, is required. Each dialing rule has a priority, which is used to restrict
the sequence and avoid conflict.
Figure 3-32 Dialing Rule Configuration Interface (Standard)
See Figure 3-32 for the Dialing Rule Configuration interface under the standard mode. The list in
the above figure shows the dialing rules with their priorities and description, which can be added
by the
Add New
button on the bottom right corner. See Figure 3-33 for the dialing rule adding
interface.
Figure 3-33 Add New Dialing Rule
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
