Carlton SP5014TRX, Руководство пользователя

Страница: 68 / 160

SP5014TRX SERVICING CUTTER WHEEL
48
TOOTH ARRANGEMENT

Inspect pockets, teeth and bolts for damage
and replace as required.

When replacing pockets, always replace
new pockets across from each other in
order to prevent vibration.

Replacement teeth must be carbide tipped
and have like design as provided with the
machine.

Use anti-seize on threads to prevent bolts
from “freezing up” in cutter wheel.

When replacing complete set of teeth, be
sure to duplicate original factory tooth
arrangement.

Torque bolts to 170 ft/lbs.
Opposing outside pockets carry like arrangements of teeth to cancel vibration.

Straight teeth are mounted in TWO
OPPOSING OUTSIDE POCKETS. A
straight tooth must have a 45° tooth
accompanying it in the same pocket set.

The opposite pocket sets should have this
same combination of straight and 45° teeth,
except with positions reversed. Mounting
these teeth opposite each other on the cutter
wheel cancels damaging vibration.

Two Remaining Outside Pockets must have
45° teeth overlapping centerline of wheel
to make plunge cuts possible. Mount two
left 45° teeth opposite two right 45° teeth.

Inside pockets require 45° teeth mounted
away from the wheel.