Carel optiMist EC005 0 Series, Руководство пользователя

Страница: 20 / 46

20
ENG
“optiMist” +0300065EN - rel. 1.6 - 18/06/2021
Analg.
4 4 View_Value_Lim_EC I.E.C.: limit probe [B7] R -20,0
-4,0
0
3
70,0
158,0
100,0
100,0
°C /°F / %rH
/ %
5 5 Probe3_Value I.E.C.; Heating recovery activation analog signal [B3] R 0 100,0 %
6 6 T_Probe_View Water temperature [B4] R -20,0
-4,0
70,0
158,0
°C/°F
7 7 View_Value_AUX AUX probe temperature [B5] R -20,0
-4,0
70,0
158,0
°C/°F
8 8 P_Probe_View Pressure of outlet water [B8] R 0 20,0 /300 bar/psi
9 9 Setp_Humid HUMID: Main regulation humidity sepoint R/W 0 100,0 50,0 %rH
10 10 Humid_Diff HUMID: Main regulation humidity delta R/W 0 100,0 5,0 %rH
11 11 L_Humid_Set HUMID.: Limit probe humidity sepoint [%rH] R/W 0 100,0 100,0 %rH
12 12 L_Humid_Diff Humid: Limit probe humidity delta [%rH] R/W 0 100,0 5,0 %rH
13 13 L_Temp_Set Humid.: Limit probe temperature sepoint R/W 0 100,0 25,0
77,0 °C/°F
14 14 L_Temp_Diff Humid: Limit probe temperature delta R/W 0 100,0 5,0
41
°C/°F
15 15 Main_Prb_Setpoint_EC I.E.C.: Main regulation temperature sepoint R/W 0 99,9 25,0/77,0 °C/°F
16 16 Main_Prb_Delta_EC I.E.C.: Main regulation temperature delta R/W 0 99,9 2,0 / 35 °C/°F
17 17 Main_Prb_Band_EC I.E.C.: Main regulation temperature band R/W 0 99,9 5,0 / 41 °C/°F
18 18 Limit_Prb_Setp_HF_EC I.E.C.: Limit probe humidity sepoint R/W 0 100,0 95,0 %rH
19 19 Limit_Prb_Band_HF_ECHF I.E.C.: Limit probe humidity delta R/W 0 100,0 5,0 %rH
20 20 Limit_Prb_Setp_T_EC I.E.C.: Limit probe temperature sepoint R/W 0 99,9 20,0 / 68 °C/°F
21 21 Limit_Prb_Band_T_ECHF I.E.C.: Limit probe temperature delta R/W 0 99,9 5,0 / 41 °C/°F
22 22 High_Room_Humid HUMID: threshold high humidity by main regulation probe reading R/W 0 100,0 100,0 %rH
23 23 Low_Room_Humid HUMID: threshold low humidity by main regulation probe reading R/W 0 100,0 0 %rH
24 24 High_Limit_Humid HUMID. threshold high humidity by limit probe reading R/W 0 100,0 100,0 %rH
25 25 High_Limit_Temp HUMID: threshold high temperature by limit probe reading R/W 0 150,0 40,0/104 °C/°F
26 26 High_Room_Temp_EC I.E.C.: threshold high temperature by main regulation probe reading R/W 0 150,0 40,0/104 °C/°F
27 27 Low_Room_Temp_EC I.E.C.: threshold low temperature by main regulation probe reading R/W 0 150,0 10,0 / 50 °C/°F
28 28 High_Limit_Humid_EC I.E.C.: threshold high humidity by limit probe reading R/W 0 100,0 100,0 %rH
29 29 High_Limit_Temp_EC I.E.C.: threshold high temperature by limit probe reading R/W 0 150,0 40,0/104 °C/°F
Dig.
41 41 Unit_Measure Unit measure (0=International System; 1= Imperial) R/W 0 1
42 42 Type_Machine_208 Supply voltage (0= 230V 50Hz; 1=230V 60Hz) R 0 1
43 43 Priority_Humidity_Running Zone running (0=I.E.C., 1= Humidification) R 0 1
44 44 Priority_Humidity_Din Priority summer/winter mode by digital input (0=I.E.C., 1=Humidification) R 0 1
45 45 Heat_Recovery_Active I.E.C.: heat recovery status (0=Not active; 1=Active) R/W 0 1
46 46 Lim_Flow_EC_Type I.E.C.: Flow limit signal type( 0=Damper; 1=Fan) R 0 1
47 47 Dout_02 Pump activation status [Dout 02] R 0 1
48 48 Dout_10 Water treatment system status [Dout 10] R 0 1
49 49 Dout_01 Main line fill valve status (0=closed; 1=opened) [Dout 1] R 0 1
50 50 Dout_04 Step 1 fill valve status (0=closed; 1=opened) [Dout 4] R 0 1
51 51 Dout_05 p 2 fill valve status (0=closed; 1=opened) [Dout 5] R 0 1
52 52 Dout_06 Step 1 drain valve status (0=closed; 1=opened) [Dout 6] R 0 1
53 53 Dout_09 Step 2 drain valve status (0=closed; 1=opened) [Dout 9] R 0 1
54 54 Dout_03 Main line drain valve status (0=closed; 1=opened) [Dout 3] R 0 1
55 55 Req_Wash Request of wash procedure running R 0 1
56 56 Dout_13 Anti-freeze procedure activation[Dout 13] R 0 1
57 57 Dout_12 Heartbeat of this cabinet [Dout 12] R 0 1
58 58 Heartbeat_Din BACKUP: Other cabinet heartbeat by digital input [ID 4] R 0 1
59 59 Superv_OnOff On/Off by supervisor (0=Off, 1=On) R/W 0 1
60 60 En_Scheduler Enable time scheduler R/W 0 1 0
61 61 En_Reg_From_Superv HUMIDIFICATION: enable regulation by supervisor R/W 0 1 0
62 62 En_Reg_EC_From_Superv I.E.C.: enable regulation by supervisor R/W 0 1 0
63 63 Heat_Recovery_Active_BMS Enable heat recovery by supervisor R/W 0 1 0
64 64 En_Defrost Enable anti-freeze function R/W 0 1 0
65 65 RESET_ALARMS Request to reset/clear alarm memories R/W 0 1 0
66 66 SET_DAY Request to copy NEW_DAY into DAY R/W 0 1 0
67 67 SET_MONTH Request to copy NEW_MONTH into MONTH R/W 0 1 0
68 68 SET_YEAR Request to copy NEW_YEAR into YEAR R/W 0 1 0
69 69 SET_HOUR Request to copy NEW_HOUR into HOUR R/W 0 1 0
70 70 SET_MINUTE Request to copy NEW_MINUTE into MINUTE R/W 0 1 0
71 71 Remote_Hum_Req HUMIDIFICATION: request by on/off contact R 0 1
72 72 Remote_EC_Req I.E.C.: request by on/off contact R 0 1
73 73 Air_Flow_Switch Flux digital input status [ID 9] R 0 1
74 74 Aux_Enabled Enable AUX probe [B5] R/W 0 1
75 75 HeartBeat_Superv BACKUP: heart heartbeat other cabinet (by supervisor) R/W 0 1
76 76 En_rotation Enable rotation between two cabinets R/W 0 1
87 87 Default_Ahead Memory erasing and default values intallation running R 0 1
90 90 Heart_Beat_RC2 Test pCO (write 1, after 2 s this variable is reset) R/W 0 1
Int.
1 209 Type_Machine_Display Model of the cabinet R 1 13
2 210 Qa_N_Pump_Display Pump capacity R 0 1000
2200 kg/h / lb/h
3 211 N_Steps Number of steps present R 1 2
4 212 Qa_N_Rack_X HUMIDIFICATION: steps capacity R 0 1000
2200
5 213 Qa_N_Rack_2_X I.E.C.: steps capacity R 0 1000
2200
6 214 Installation_Type Installation type ( 0=I.E.C., 1=Humidification, 2= Humidifi I.E.C. ) R 0 2
7 215 Unit_Status Main mask status visualization (0=OFF BY SCHEDULER;1=REMOTE
OFF;2=OFF BY KEYBOARD;3=OFF BY SUPERVISOR;4=OFF BY
FLUXOSTAT;5=PUMP OFF BY KEYBOARD.;6=PUMP OFF BY REMOTE.;7=PRE
SSURIZATION;8=WATER INLET WAITING;9=OFF BACKUP;10=ALARM;11=W
ARNING;12=not used...;13=TEST PRESS. IN;14=FILLING;15=WASHING;16=R
EADY;17=PRODUCTION;18=BYPASS CALIBRATION;19=INIZIALIZATION;) R 0 19
8 216 Main_Status Main status R 0 25
9 217 Qr_Pump 0-10V signal to inverter (0-1000) [Aout Y2] R 0 1000
10 218 Regulation_Type HUMIDIFICATION: Regulation type 0=Reg.Humidity, 1=Reg.hum.+Limit
Humid., 2=Reg.Humid+Limit Temp, 3=Not used, 4=Not used, 5=Not used,
6=External prop.signal., 7=Ext.limit Humid, 8=Ext.limit
Temp,9=ON/OFF ext.contact R 0 9
11 219 Humidity_Cfg HUMIDIFICATION: Main probe type ( 0=NTC;1=0-1 V; 2=2-10 V;3= 0-10 V;
4=0-20 mA; 5=4-20 mA; 6=0-135 ohm; 7=135-1k ohm ) R 0 7
12 220 Limit_Cfg HUMIDIFICATION: Limit probe type ( 0=NTC;1=0-1 V; 2=2-10 V;3= 0-10 V;
4=0-20 mA; 5=4-20 mA; 6=0-135 ohm; 7=135-1k ohm ) R 0 7