Carel optiMist EC005 0 Series, Руководство пользователя

Страница: 19 / 46

19
ENG
“optiMist” +0300065EN - rel. 1.6 - 18/06/2021
Rotation function
The rotation function allows the periodical activation of the two cabins.
In the main cabin:
• enable Rotation function,without enabling the backup;
• set the Rotation time value.
In the backup cabin the HBT control must be set.
To permit the rotation to work, the wiring of the HBT control must be
done from the main cabin to the backup one and vice versa.
3.13 Supervisor network
J5
J4
J3 J2 J1
serial card field card
service card
ID1 ID2 ID3 ID4 ID5 ID7 ID8 IDC1 VG VG
0
Y1 Y2 Y3 Y4 B4 BC4 B5 BC5 B1 B2 B3
J24
+V
term
GND +5V
ref
GND +VDC G G0
NO8
C7 C4 C1 C8
NO7 NO4 NO1 NC8
C7
NO5 NO2 NO3
C4 C1
Rx-/Tx-
Rx+/Tx+
GND
J9 J10
J11 J12 J13 J14 J15
input: 24 V / V ; 50 to 60 Hz
max. power: 40 VA / 15 W
J3 J2
field card
ID1 ID2 ID3 ID4 ID5 ID7 ID8 IDC1 VG VG
0
Y1 Y2 Y3 Y4 B4 BC4 B5 BC5 B3 GND +VDC ID7 ID7 ID5 ID5 ID4 ID4 ID3 ID3 ID2 ID2 ID1 ID1 Y4 Y4 Y3 Y3 Y2 Y2 Y1 Y1 VG
0
VG
0
VG VG
Fig. 3.aa
Optional CAREL cards
network/card protocol supported
PCOS004850 RS485 CAREL, Modbus®
PCO100MDM0 RS232 (external modem) CAREL for remote connections
PCO1000WB0 Ethernet™
TCP/IP
SNMP v1 &v2c
BACnet™ Ethernet™ ISO8802-2/8802-3
BACnet/IP
PCO1000BA0 Ethernet™ (Modbus®) BACnet™ MS/TP
Tab. 3.d
Important:
Follow the instructions shown on the optional cards
for the technical specifi cations, connections and expansion boards.
Default: CAREL supervisor protocol.
3.14 Supervisory optiMist Table
Type Carel
Index
Modbus
®
Index
Name Description R/W Min
Limit
Max
limit
Def. Unit of
measure
Alarms
1 1 Al_No_Model Alarm: model not yet confi gured R 0 1
2 2 Al_Setting_Nominal_MFR Alarm: capacity of the distribuition system not yet confi gured R 0 1
3 3 Al_RO_Not_Ready Alarm: Water Treatement System R 0 1
4 4 mAl_LP_Detected_New Alarm: Low Pressure by pressostat (ID5) R 0 1
5 5 Al_high_Temp_Bypass Alarm: High temperature water in bypass R 0 1
6 6 Al_VFD_Not_Ready Alarm: Inverter R 0 1
8 8 Al_Antifreeze_Temp Alarm: low temperature in cabinet R 0 1
9 9 Al_HP_Detected Alarm: drop separator clogged R 0 1
10 10 mAl_High_Press Allarme: alta pressione da sonda R 0 1
11 11 mAl_LP_Probe Alarm: low pressure by probe R 0 1
12 12 mAl_Probe8_Broken Alarm: pressure probe broken or unconnected R 0 1
13 13 mAl_Probe1_Broken Alarm: I.E.C. - main probe broken or unconnected R 0 1
14 14 mAl_Probe2_Broken Alarm: I.E.C. - limit probe broken or unconnected R 0 1
15 15 mAl_Probe6_Broken Alarm: I.E.C. - main probe broken or unconnected R 0 1
16 16 mAl_Probe7_Broken Alarm: I.E.C. - limit probe broken or unconnected R 0 1
17 17 mAl_Probe5_Broken Alarm: AUX probe broken or unconnected R 0 1
18 18 Clock_Error Error reading/writing the RTC (real time clock) data and/or clock RAM R 0 1
19 19 mAl_Probe4_Broken Alarm: water temperature probe broken or unconnectd R 0 1
20 20 Al_High_humid Alarm: HUMIDIFICATION high humidity R 0 1
21 21 Al_Low_Humid Alarm: HUMIDIFICATION low humidity R 0 1
22 22 Al_Limit_Humid Alarm: HUMIDIFICATION high limit temperature/humidity R 0 1
23 23 Al_High_Temp_EC Alarm: I.E.C. high limit temperature R 0 1
24 24 Al_Limit_Humid_EC Alarm: I.E.C. high limit temperature/humidity R 0 1
25 25 mAl_Probe3_Broken Alarm: I.E.C. heat recovery activation signal by analog input broken or
unconnected R 0 1
26 26 Al_warn_RO Warning: Water Treatment System R 0 1
Analg.
1 1 View_Value HUMID: main/regulation probe [B1] R -20,0
-4,0
0
0
70,0
158,0
100,0
100,0
°C /°F / %rH
/ %
2 2 View_Value_Lim HUMID:: limit probe [B2] R -20,0
-4,0
0
1
70,0
158,0
100,0
100,0
°C /°F / %rH
/ %
3 3 View_Value_EC I.E.C.: main/regulation probe [B6] R -20,0
-4,0
0
2
70,0
158,0
100,0
100,0
°C /°F / %rH
/ %