Capintec CAPTUS 600 Скачать руководство пользователя страница 97 | Manualshive

Страница: 97 / 218

Capintec CAPTUS 600 Скачать руководство пользователя страница 97

CAPINTEC, INC.

CAPTUS

®

600

If the prompt is not at the first uptake, the previous uptake can be re-measured.

If the “ONE CAPSULE” method has been chosen and the capsule has been measured but
not administered, it can be re-measured.

Use the

ARROW

keys to move the prompt to the correct line if necessary.

Press

ENTER

to begin the measurement.

If all the scheduled measurements have been made, Figure 8-12 will appear.

14:32

THYROID UPTAKE

DASILVA, AND

PROTOCOL: 1 CAPSULE

CAPSULE : TU 11:09 250.0

UPTAKE 1: 24%

μ

UPTAKE 2: 30%

> REVIEW RESULTS

MEASUREMENT FINISHED

Ci

Figure 8-12

Pressing

ENTER

with the prompt at “REVIEW RESULTS” will bring up the Graphic Display

Screen (Figure 8-14) described below.

MEASURING THE NECK AND THIGH

The main part of the Thyroid Uptake Study is measuring the patient’s neck and thigh. This is
the same for all Calculation Methods.

The measurement begins by prompting the user to measure the neck at the distance
previously chosen as shown in Figure 8-13.

November 07

THYROID UPTAKE GENERAL INSTRUCTIONS

8-7

«
...
95
96
97
98
99
...
»

Содержание CAPTUS 600



























































































































































































































Отзывы:

Нет отзывов