Capintec CAPTUS 600, Руководство пользователя, Страница: 101 / 218

CAPINTEC, INC. CAPTUS
®
600
PRINTING RESULTS
After the uptake measurements have been completed, a results summary screen for the
chosen method will be displayed as shown in Figure 8-20. The results of all the uptakes thus
far performed for this patient will be displayed in graphic form:
AGAIN
DONE
P
............................................
............................................
............................................
............................................
............................................
2
24 hours
50
40
30
20
10
*
%
U
P
T
A
K
E
DASILVA, AND
*
Figure 8-20
The calculated values are indicated by the asterisks(*).
The hours are the actual time intervals rounded to the nearest hour.
The short, solid horizontal lines indicate the minimum and maximum normal values entered
in the protocol (unless 0 and 99 were chosen, which indicates “no” minimum and maximum).
Note: There is a 1 hour time window, before and after the chosen uptake time where the
minimum and maximum value markers will appear on the graph. If the uptake is
measured before or after the window, the result (*) will appear but the minimum and
maximum will not be shown.
Press
PRINT [P] to print a report of this Thyroid Uptake study. The information in the report
depends upon the Thyroid Uptake method chosen.
Press
F1 [AGAIN] if you realized an error was made in the measurement and want to repeat
the measurement.
Press
F4 [DONE] to exit the screen and return to the Patient Selection Screen (Figure 8-2).
November 07 THYROID UPTAKE GENERAL INSTRUCTIONS 8-11