Capintec CAPTUS 3000 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 338

Capintec CAPTUS 3000 Скачать руководство пользователя страница 88

CAPINTEC, INC.

CAPTUS

®

3000

Figure 6-1 Isotopes Main Screen

The

Isotope Library

box in the middle of the screen lists the isotopes alphabetically, with

their respective

Half-Lives

in minutes (M), hours (H), days (D) or years (Y),

keV

(for major

energy peaks), and

Well

and

Probe

efficiencies, if known. The icons at the top provide

functions for adding new isotopes, editing and deleting the added isotopes and printing the

library. The

and

buttons at the bottom of the screen let

you measure efficiency or enter a new efficiency value respectively for the selected isotope.

Note: At the top right of the Isotope Library box, the message “Checked Isotopes will be

used in Wipe Test for Contaminant Identification” is displayed. All isotopes with a
check mark in their check box will have their energy peaks used for isotope
identification in the Wipe Test module.

To return to the CAPTUS

®

3000 Main screen from this screen, click the

icon or

press the

Esc

key.

VIEWING AND PRINTING ISOTOPE LIBRARY

1. To view all the isotopes, scroll up or down the list in

Isotopes Library

box using the

scroll bar or use

Page Down

,

Page Up

,



and



keys.

2. To locate an isotope, press the first letter of the isotope to bring it into view. The first

isotope with that letter is highlighted. Use



key to move further down if necessary.

3. To print the entire contents of Isotope Library, click the

icon.

6-2

ISOTOPES

November 13

«
...
86
87
88
89
90
...
»

Содержание CAPTUS 3000



















































































































































































































































































































































Отзывы:

Нет отзывов