Capintec CAPTUS 3000 Скачать руководство пользователя страница 165

Страница: 165 / 338

CAPINTEC, INC.

CAPTUS

3000

Figure 9-12

1. To input new values in any frame, click the appropriate text box or radio button or use the

Tab

key to move from one selection to another.

2. Click the

button to save changes or click the

button to discard the

changes and return to Figure 9-3 Absorbed Dose ALERT Main Screen.

Note: Changing any of the parameters will not affect patients which were already counted

before the edit took place. All patients added after the edit will use the changed
parameters.

QUICK TIP:

•

To return to previous screen without saving changes press the

ESC

key.

ADDING PATIENTS

Note: All fields in bold are required before you can begin an Absorbed Dose ALERT

emergency screening measurement.

1. Click the

icon on Figure 9-3 Absorbed Dose ALERT Main Screen. Figure 9-13

Patient Data Screen will appear. All information input in the Incident Setup will appear on
this screen.

July 14

ABSORBED DOSE ALERT

9-11

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 165 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: