Capintec CAPTUS 3000 Скачать руководство пользователя страница 287

Страница: 287 / 338

CAPINTEC, INC.

CAPTUS

3000

under the given file name and folder. After returning to Figure 14-1 Main Archive Screen,
archived data will appear in the box.

QUICK TIPS:

•

The default file name and folder are designed to make record keeping easy.

It is recommended not to change these defaults.

•

Once system backup is performed, the archive files now contain all the data

collected in all the modules (except Time Activity Analysis). To discard old

records from module screens, go to each module and use the

icons as desired. The archived data will not be affected.

OPENING AN ARCHIVE

1. Click the

icon to open an archive. The screen appears as shown in Figure 14-3.

Figure 14-3

2. The screen shows existing archive files in the default Captus3000\Archive folder. Click on

the file name to open it or type in the filename in

File name

box and click the

button or press

Alt+O

3. To return to Figure 14-1 Main Archive Screen without opening any file, click the

button or press the

Esc

key.

November 13

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 287 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: