Capintec CAPTUS 3000 Скачать руководство пользователя страница 106

Страница: 106 / 338

CAPINTEC, INC.

CAPTUS

3000

5. Click the

button or press the

key to confirm the deletion. Otherwise, click

the

button or press the

key.

6. Click the

icon return to Figure 7-1 Main Thyroid Uptake Screen.

Printing Protocol Report

Click the

icon to print a list of existing protocols with their settings.

PATIENT INFORMATION

Adding Patients

To add patients to the database, at least one measurement protocol must exist. To create a
protocol, refer to

MEASUREMENT PROTOCOLS

on page 7-3.

Note: All fields in bold are required before you can begin the uptake procedure. However,

you may enter the patient name, ID and Date of Birth and click the

button

and enter the rest later. The Patient Status box on Figure 7-1 Main Thyroid Uptake
Screen will show that the patient data is partially entered.

1. Click the

icon on Figure 7-1 Main Thyroid Uptake Screen. The Patient

Information screen appears as shown in Figure 7-9, with information to be entered in
three sections.

Figure 7-9

7-10

THYROID UPTAKE

November 13

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 106 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: